Real and effective Cisco CCNA 200-125 dumps, online Cisco 200-125 exam practice test, free online download 200-125 pdf! Pass the 200-125 exam “Cisco Certified Network Associate Exam (CCNA)”: https://www.leads4pass.com/200-125.html (1222 Q&As) Follow me!
Get more latest effective exam dumps!
[PDF] Free Cisco CCNA 200-125 pdf dumps download from Google Drive: https://drive.google.com/open?id=1xtfK-KcI-DqjeTxTJAY8k-hlHdyKraqt
[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx
200-125 CCNA – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/200-125-ccna.html
Free test Cisco CCNA 200-125 Exam Questions and Answers
QUESTION 1
Which functionality does an SVI provide?
A. OSI Layer 2 connectivity to switches
B. remote switch administration
C. traffic routing for VLANs
D. OSI Layer 3 connectivity to switches
Correct Answer: C
QUESTION 2
How does using the service password-encryption command on a router provide additional security?
A. by encrypting all passwords passing through the router
B. by encrypting passwords in the plain text configuration file
C. by requiring the entry of encrypted passwords for access to the device
D. by configuring an MD5 encrypted key to be used by routing protocols to validate routing exchanges
E. by automatically suggesting encrypted passwords for use in configuring the router
Correct Answer: B
By using this command, all the (current and future) passwords are encrypted. This command is primarily useful for
keeping unauthorized individuals from viewing your password in your configuration file
QUESTION 3
Which three options are the HSRP states for a router? (Choose three.)
A. initialize
B. learn
C. secondary
D. listen
E. speak
F. primary
Correct Answer: BDE
HSRP States
QUESTION 4
Which HSRP feature was new in HSRPv2?
A. VLAN group numbers that are greater than 255
B. virtual MAC addresses
C. tracking
D. preemption
Correct Answer: A
QUESTION 5
What is known as “one-to-nearest” addressing in IPv6?
A. global unicast
B. anycast
C. multicast
D. unspecified address
Correct Answer: B
IPv6 Anycast addresses are used for one-to-nearest communication, meaning an Anycast address is used by a device
to send data to one specific recipient (interface) that is the closest out of a group of recipients (interfaces).
QUESTION 6
How many bits are contained in each field of an IPv6 address?
A. 24
B. 4
C. 8
D. 16
Correct Answer: D
An IPv6 address is represented as eight groups of four hexadecimal digits, each group representing 16 bits (two octets).
The groups are separated by colons (:). An example of an IPv6 address is
2001:0db8:85a3:0000:0000:8a2e:0370:7334.
QUESTION 7
which two statements about vtp are true?
A. all switches must be configured with the same VTP domain name
B. all switches must be configured with a unique vtp domain name
C. all switches must be configured to perform trunk negotiation
D. all switches must use the same VTP Version
E. The VTP Server must have the highest revision number in the domain
Correct Answer: AD
QUESTION 8
Which IPv6 address is the equivalent of the IPv4 interface loopback address 127.0.0.1?
A. ::1
B. ::
C. 2000::/3
D. 0::/10
Correct Answer: A
In IPv6 the loopback address is written as,::1
This is a 128bit number, with the first 127 bits being \\’0\\’ and the 128th bit being \\’1\\’. It\\’s just a single address, so could also be written as::1/128.
QUESTION 9
Which two protocols can detect native VLAN mismatch errors? (Choose two.)
A. CDP
B. VTP
C. DTP
D. STP
E. PAGP
Correct Answer: AD
QUESTION 10
Routing has been configured on the local router with these commands:
Local(config)# ip route 0.0.0.0 0.0.0.0 192.168.1.1
Local(config)# ip route 10.1.0.0 255.255.255.0 192.168.2.2
Local(config)# ip route 10.1.0.0 255.255.0.0 192.168.3.3 Drag each destination IP address on the left to its correct next
hop address on the right.
Select and Place:
Correct Answer:
If we have many entries matching for next hop IP address then the router will choose the one with the most specific path to
send the packet. This is called the “longest match” rule, the route with the most bits in the mask set to “1 will be chosen
to route the packet.
QUESTION 11
Which command must you enter to switch from privileged EXEC mode to user EXEC mode on a Cisco device?
A. configure terminal
B. logout
C. disable
D. enable
Correct Answer: B
QUESTION 12
Which two types of NAT addresses are used in a Cisco NAT device? (Choose two.)
A. inside local
B. inside global
C. inside private
D. outside private
E. external global
F. external local
Correct Answer: AB
QUESTION 13
Which two services can be provided by a wireless controller? (choose two)
A. issuing IP addresses to wired devices
B. mitigating threats from the internet
C. providing authentication services to users
D. managing interference in a dense network
E. Layer 3 routing between wired and wireless devices
Correct Answer: CD
Share the latest Cisco CCNA 200-125 dumps and online exam exercises for free! 200-125 exam questions and answers! Improve your skills and exam experience! Pass the 200-125 exam: https://www.leads4pass.com/200-125.html (1222 Q&As). Follow me! Get more up-to-date and valid exam dumps.
Related 200-125 Popular Exam resources
leads4pass Promo Code 12% Off
Why Choose leads4pass?
leads4pass helps you pass the exam easily! We compare data from all websites in the network, other sites are expensive,
and the data is not up to date, leads4pass updates data throughout the year. The pass rate of the exam is above 98.9%.
