Real and effective Cisco ICND1 100-105 dumps, online Cisco 100-105 exam practice test, free online download 100-105 pdf!
Pass the 100-105 exam “Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0”: https://www.leads4pass.com/100-105.html (702 Q&As) Follow me! Get more latest effective exam dumps!
[PDF] Free Cisco ICND1 100-105 pdf dumps download from Google Drive: https://drive.google.com/open?id=1dRRETElERq8DLJ-P2tVw4L2yskY66gKb
[PDF] Free Full Cisco pdf dumps download from Google Drive: https://drive.google.com/open?id=1CMo2G21nPLf7ZmI-3_hBpr4GDKRQWrGx
100-105 ICND1 – Cisco: https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/100-105-icnd1.html
Free test Cisco ICND1 100-105 Exam Questions and Answers
QUESTION 1
Drag and Drop Question
Drag and drop the IEEE standard Cable names from the left onto the correct cable types on the right.
Select and Place:
Correct Answer:
QUESTION 2
Which two Syslog configuration commands do you use to log warnings to the syslog server? (Choose two.)
A. logging trap level informational
B. logging trap level alerts
C. logging trap level notice
D. logging trap level critical
E. logging trap level error
Correct Answer: AC
QUESTION 3
A network administrator is trying to add a new router into an established OSPF network. The networks attached to the
new router do not appear in the routing tables of the other OSPF routers. Given the information in the partial
configuration shown below, what configuration error is causing this problem?
Router(config)# router ospf 1 Router(config-router)# network 10.0.0.0 255.0.0.0 area 0
A. The process id is configured improperly.
B. The OSPF area is configured improperly.
C. The network wildcard mask is configured improperly.
D. The network number is configured improperly.
E. The AS is configured improperly.
F. The network subnet mask is configured improperly.
Correct Answer: C
When configuring OSPF, the mask used for the network statement is a wildcard mask similar to an access list. In this
specific example, the correct syntax would have been “network 10.0.0.0 0.0.0.255 area 0.”
QUESTION 4
DRAG DROP
Drag and drop the VTP terms from the left onto the correct descriptions on the right.
Select and Place:
Correct Answer:
QUESTION 5
Refer to the exhibit.
An administrator replaced the 10/100 Mb NIC in a desktop PC with a 1 Gb NIC and now the PC will not connect to the
network. The administrator began troubleshooting on the switch. Using the switch output shown, what is the cause of
the problem?
A. Speed is set to 100Mb/s.
B. Input flow control is off.
C. Encapsulation is set to ARPA.
D. The port is administratively down.
E. The counters have never been cleared.
Correct Answer: A
QUESTION 6
Which statement about port security is true?
A. It is not supported on private VLANs.
B. It can be configured on SPAN destination ports.
C. The default port security configuration allows for a maximum of 10 MAC addresses.
D. In sticky mode, the port retains dynamically-learned addresses during a link failure.
Correct Answer: D
QUESTION 7
Which sequence of actions will allow telneting from a user\\’s PC to a router using TCP/IP?
A. Connect the PC\\’s COM port to the router\\’s console port using a straight-through cable.
B. Connect the PC\\’s COM port to the router\\’s console port using a crossover cable.
C. Connect the PC\\’s COM port to the router\\’s Ethernet port using a straight-through cable.
D. Connect the PC\\’s Ethernet port to the router\\’s Ethernet port using a crossover cable.
E. Connect the PC\\’s Ethernet port to the router\\’s Ethernet port using a rollover cable.
F. Connect the PC\\’s Ethernet port to the router\\’s Ethernet port using a straight-through cable.
Correct Answer: D
QUESTION 8
The network administrator is using a Windows PC application that is called putty.exe for remote communication to a
switch for network troubleshooting. Which two protocols could be used during this communication? (Choose two).
A. SNMP
B. HTTP
C. Telnet
D. RMON
E. SSH
Correct Answer: CE
QUESTION 9
Which Cisco IOS feature can dynamically assign IP addresses to hosts?
A. DHCP Relay
B. TFTP
C. DNS
D. DHCP
Correct Answer: D
QUESTION 10
Which of the following is a characteristic of full-duplex communication?
A. It is a CSMA/CD network.
B. It is a CSMA/CA network.
C. It is point-to-point only.
D. Hub communication is done via full duplex.
Correct Answer: C
QUESTION 11
Which option does the route 0.0.0.0/0 represent?
A. Route with the lowest administrative distance
B. Gateway of last resort
C. Null route
D. Empty routing table
Correct Answer: B
QUESTION 12
Which two characteristics apply to Layer 2 switches? (Choose two.)
A. increases the number of collision domains
B. decreases the number of collision domains
C. implements VLAN
D. decreases the number of broadcast domains
E. uses the IP address to make decisions for forwarding data packets
Correct Answer: AC
Layer 2 switches offer a number of benefits to hubs, such as the use of VLANs and each switch port is in its own
separate collision domain, thus eliminating collisions on the segment.
QUESTION 13
What happens when an 802.11a node broadcasts within the range of an 802.11g access point?
A. The access point transmits, but the node is unable to receive.
B. A connection occurs
C. Both the node and the access point are unable to transmit.
D. The node transmits, but the access point is unable to receive.
Correct Answer: D
Share the latest Cisco ICND1 100-105 dumps and online exam exercises for free! 100-105 exam questions and answers! Improve your skills and exam experience! Pass the 100-105 exam: https://www.leads4pass.com/100-105.html (702 Q&As). Follow me! Get more up-to-date and valid exam dumps.
Related 100-105 Popular Exam resources
| title | youtube | 100-105 ICND1 – Cisco | leads4pass | |
|---|---|---|---|---|
| Cisco 100-105 | leads4pass 100-105 dumps pdf | leads4pass 100-105 youtube | 100-105 ICND1 – Cisco | https://www.leads4pass.com/100-105.html |
| Cisco ICND1 | https://www.leads4pass.com/100-105.html |
leads4pass Promo Code 12% Off
Why Choose leads4pass?
leads4pass helps you pass the exam easily! We compare data from all websites in the network, other sites are expensive, and the data is not up to date, leads4pass updates data throughout the year. The pass rate of the exam is above 98.9%.
