The latest updated Lead4Pass 350-501 dumps in December, verified by the Cisco expert team, are real and effective.
Download the 350-501 dumps with PDF and VCE: https://www.leads4pass.com/350-501.html (419 Q&A), and practice the complete 350-501 exam questions and answers carefully to ensure 100% of candidates Successfully passed the 350-501 SPCOR exam.
Free PDFs of some 350-501 dumps for candidates to experience:
https://drive.google.com/file/d/1E1H5EvgOXE68K71gHOH53H-0Z7OaDCfe/
Experience some Latest 350-501 Dumps exam questions and answers online
| Number of exam questions | Exam name | From | Release time | Last updated |
| 15 | Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) | Lead4Pass | Dev 01, 2022 | 350-501 dumps |
New Question 1:
Refer to the exhibit.
A network operator must configure CSR1 interlaces GigabitEihernet2 and GigabitEthemet to rewrite VLAN tags 12 and 21 for traffic between R1 and R2 respectively. Which configurator accomplishes this task?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C
IF bridge domain on both interfaces is 10
New Question 2:
A layer 2 aggregation deployed via IEEE 802.1D has many nodes on a single link A DHCP version 6 server cannot recognize how the clients are attached to a network, Which solution provides a client identification to the DHCPv6 in this scenario?
A. LDRA
B. DHCPv6 relay agent
C. DHCP snooping
D. Broadband Forum Trunk N:1
Correct Answer: A
New Question 3:
Which three OSPF parameters must match before two devices can establish an OSPF adjacency? (Choose three.)
A. IP address
B. subnet mask
C. interface cost
D. process ID
E. area number
F. hello timer setting
Correct Answer: BEF
New Question 4:
DRAG DROP
Drag and drop the technologies from the left onto the correct definitions on the right.
Select and Place:
Correct Answer:
New Question 5:
Refer to the exhibit.
After implementing a new design for the network, a technician reviews the picture’s CLI output as part of the MOP. Which two elements describe what the technician can ascertain from the ImpNull output? (Choose two.)
A. Ultimate Hop Popping is in use for the prefix displayed.
B. Penultimate Hop Hopping is in use for the prefix displayed.
C. Label 0 is used for the prefix displayed, but will not be part of the MPLS label stack for packets destined for 192.168.10.10.
D. Label 3 is in use for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10.
E. Label 0 is used for the prefix displayed and will be part of the MPLS label stack for packets destined for 192.168.10.10.
Correct Answer: BD
Implicit null is by default which means the penultimate router should only send an IP packet thus it pops the label (popping the label is known as PHP and this is done to reduce the load on the last hop router)
New Question 6:
Refer to the exhibit.
Which effect of this configuration is true?
A. It enables MPLS on the interface.
B. It creates a pseudowire class named cisco.
C. It enables AToM on interface gigabitethernet1/0.
D. It enables tagging for VLAN 12 on the interface.
Correct Answer: C
New Question 7:
Refer to the exhibit.
What does this REST API script configure?
A. VRF
B. interface with IP address 192.168.0.1
C. application profile
D. public community string for SNMP
Correct Answer: B
New Question 8:
Refer to the exhibit.
R1# configure terminalR1(config)# router isis area2R1(config-router)# metric-style wide lever-1
An engineer is configuring multitiopology IS-IS for IPv6 on router R1. Which additional configuration must be applied to complete the task?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: C
New Question 9:
Refer to the exhibit.
! configure terminalip cef distributed
interface gigabitethernet 1/0ip verify unicast reverse-path 12
!
Which show command should be implemented to display per-interface statistics about uRPF drops and suppressed drops?
A. show IP traffic
B. show interface
C. show cef interface
D. show IP interface brief
Correct Answer: B
New Question 10:
Refer to the exhibit.
Assume all other configurations are correct and the network is otherwise operating normally. Which conclusion can you draw about the neighbor relationship between routers R1 and R2?
A. The neighbor relationship is up.
B. The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family.
C. The neighbor is down because the local-as value for R2 is missing in the R1 neighbor statement.
D. The neighbor relationship is down because R1 believes R2 is in AS 65012.
Correct Answer: D
New Question 11:
Which statement about segment routing prefix segments is true?
A. It is the longest path to a node.
B. It is linked to an adjacency SID that is globally unique within the router.
C. It is linked to a prefix SID that is globally unique within the segment routing domain.
D. It requires using EIGRP to operate.
Correct Answer: C
New Question 12:
Refer to the exhibit.
Which statement about this configuration is true?
A. It requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run.
B. It requires OSPF to also be running to have optimized Cisco MPLS TE tunnels.
C. It is the configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing.
D. It requires an explicit Cisco MPLS TE path to be configured for the tunnel to run.
Correct Answer: C
New Question 13:
Refer to the exhibit.
An engineer applied a gRPC dial-in configuration on customer\’s router to provide connection multiplexing and two-way streaming.
What does this configuration accomplish in a gRPC?
A. It is the encoding requested by the gRPC server.
B. IT is the encoding that is used for dial-in and dial-out.
C. It is used for encoding with the default protocol buffers
D. It is the encoding requested by the gRPC client.
Correct Answer: A
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKNMS-3537.pdf https://xrdocs.io/telemetry/tutorials/2018-03-01-everything-you-need-to-know-about-pipeline/ https://community.cisco.com/t5/service-providers-documents/implementing-grpc-telemetry-on-xr-devices/ta-p/3393966
New Question 14:
DRAG DROP
Drag and drop the BGP Best Path Algorithm rules from the left into the corresponding order of importance on the right.
Select and Place:
Correct Answer:
New Question 15:
An engineer needs to implement the QOS mechanism on the customer\’s network as some applications going over the internet are slower than others.
Which two actions must the engineer perform when implementing traffic shaping on the network in order to accomplish this task? (Choose two)
A. Configure a queue with sufficient memory to buffer excess packets.
B. Configure the token values in bytes.
C. Implement packet remarking for excess traffic.
D. Implement a scheduling function to handle delayed packets.
E. Configure a threshold over which excess packets are discarded.
Correct Answer: AD
…
Make sure you pass the exam successfully. Select lead4Pass 350-501 dumps to pass Cisco 350-501 SPCOR exam “Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) certification dumps“.
Latest update Lead4pass 350-501 dumps: https://www.lead4pass.com/350-501.html (419 Q&As)